Platforms to show: All Mac Windows Linux Cross-Platform
Back to CWGlobalsMBS module.
CWGlobalsMBS.kCWOpModeHostAP = 3
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Interface is participating in an infrastructure network as an access point.
CWGlobalsMBS.kCWOpModeIBSS = 1
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Interface is participating in an IBSS network.
CWGlobalsMBS.kCWOpModeMonitorMode = 2
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Interface is in 802.11 monitor mode.
CWGlobalsMBS.kCWOpModeStation = 0
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Interface is participating in an infrastructure network as a non-AP station.
CWGlobalsMBS.kCWOpNotPermitted = -3930
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Calling process does not have permission to perform this operation.
CWGlobalsMBS.kCWParamErr = -3900
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Parameter error.
CWGlobalsMBS.kCWPCOTransitionTimeNotSupported = -3927
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Association was denied because the requesting station does not support the PCO transition time required by the AP.
CWGlobalsMBS.kCWPCOTransitionTimeNotSupportedErr = -3927
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
Association was denied because the requesting station does not support the PCO transition time required by the AP.
CWGlobalsMBS.kCWPHYMode11a = 1
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
IEEE 802.11a PHY.
CWGlobalsMBS.kCWPHYMode11ac = 5
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
IEEE 802.11ac PHY.
CWGlobalsMBS.kCWPHYMode11b = 2
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
IEEE 802.11b PHY.
CWGlobalsMBS.kCWPHYMode11g = 3
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
IEEE 802.11g PHY.
CWGlobalsMBS.kCWPHYMode11n = 4
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
IEEE 802.11n PHY.
CWGlobalsMBS.kCWPHYModeNone = 0
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
No PHY mode.
CWGlobalsMBS.kCWReassociationDeniedErr = -3908
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Reassociation was denied because the access point was unable to determine that an association exists.
CWGlobalsMBS.kCWReferenceNotBoundErr = -3928
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
No interface is bound to the CWInterface.
CWGlobalsMBS.kCWRefNotBoundErr = -3928
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
No interface is bound to the CWInterface.
CWGlobalsMBS.kCWScanTypeActive = 0
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
In accordance with the supported channels for the active country code, the interface will transmit probe request frames and listen for probe responses.
CWGlobalsMBS.kCWScanTypeFast = 2
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
The scan will return cached scan results.
CWGlobalsMBS.kCWScanTypePassive = 1
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
The interface will listen for beacon frames on each channel irrespective of country code.
CWGlobalsMBS.kCWSecurityDynamicWEP = 6
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
Dynamic WEP security.
CWGlobalsMBS.kCWSecurityEnterprise = 10
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 13.5 |
Enterprise authentication.
CWGlobalsMBS.kCWSecurityModeDynamicWEP = 7
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Dynamic WEP 802.1X authentication.
CWGlobalsMBS.kCWSecurityModeOpen = 0
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
Open System authentication.
CWGlobalsMBS.kCWSecurityModeWEP = 1
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WEP authentication.
CWGlobalsMBS.kCWSecurityModeWPA2_Enterprise = 5
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WPA2 Enterprise authentication.
CWGlobalsMBS.kCWSecurityModeWPA2_PSK = 3
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WPA2 Personal authentication.
CWGlobalsMBS.kCWSecurityModeWPA_Enterprise = 4
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WPA Enterprise authentication.
CWGlobalsMBS.kCWSecurityModeWPA_PSK = 2
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WPA Personal authentication.
CWGlobalsMBS.kCWSecurityModeWPS = 6
Type | Topic | Plugin | Version |
const | Network | MBS MacFrameworks Plugin | 11.0 |
WiFi Protected Setup authentication.
The items on this page are in the following plugins: MBS MacFrameworks Plugin.